Arad Octave - Pulse

Octave Configuration Guide 34
Pulse
Mode – set the pulse’s accumulated volume output mode:
• “Disable” – output is disabled
• “Forward” – pulse output is a measure of forward volume
• “Reverse” – pulse output is a measure of reverse volume
• “Net” – pulse output is a measure of forward volume minus reverse
volume
Units -
set the measuring units for the meter’s pulses:
• m
3
– cubic meters
• GAL – gallons
• Ft
3
– cubic feet
• A.F. – acre feet
• IGAL – imperial gallon
• A.I. – acre inch
• Barrel