Octave Configuration Guide 8
3 Meter Info
Overview
The Meter Info tab presents the Octave water meter’s ID and version
information. It also presents the pipe standard this meter supports.
Meter
Meter ID - the meter’s unique ID.
HW ID - the meter’s board ID.
Calibration Date - the date the meter was calibrated (table 3).
Software
Version - the meter’s embedded firmware version.
Checksum (0x) - the firmware’s checksum value.
ASIC Version - the version of the application-specific integrated circuit
embedded in the meter’s board.
Compilation Date - the date the meter’s firmware was compiled.
To Next Page
Loading...
