Arad Octave - Configuration

Octave Configuration Guide 44
Meter Time – before downloading the log file, select to apply the meter’s set
time to the logged entries. (See Clock Settings.)
Local Time – before downloading the log file, select to apply the PC’s set time
to the logged entries.
Configuration
First Logs – enable or disable this minutely logging option.
Duration (minutes) – if first logs are enabled, set the logging frequency in
minutes, e.g. entering “3” will log data every three minutes.
Second Logs – enable or disable this hourly logging option.
Duration (hours) – if second logs are enabled, set the hourly frequency, e.g.
entering “3” will log data every three hours.