7. Liner and electrode selection
Liner and electrode material selection are an important issue when choosing your flowmeter. The tables below
serve to give you an idea of general material compatibility. If you are not sure about suitability of
liner/electrode material for a particular medium, please contact the Arkon sales department for further
assistance, and the site where the flowmeter is to be used for what materials are acceptable for the process
media. Arkon can only recommend materials, we cannot guarantee them.
Please note that Arkon offer also WRAS approved MAGX2 for DN25,DN50 and DN80 and WRAS approved
material for sizes up to DN600. For more info contact our sales department.
Liner Selection:
To Next Page
Loading...