Open Access
Introduction
1-2
ARM Development Board (ARM7TDMI Version)
Hardware Reference Guide
ARM DUI 0017C
1.1 Using this Manual
Chapter 1 is this introduction
Chapter 2 introduces the ARM Development Card
Chapter 3 describes the circuits of the ARM Development Card
Chapter 4 describes how to expand the ASB
Chapter 5 describes how to expand the APB
Chapter 6 describes the EmbeddedICE interface
Chapter 7 describes the logic analyser interface
Chapter 8 describes the test interface
Chapter 9 describes how to program the APB FPGA
Chapter 10 describes how to program the MACH and PAL devices
Appendix A provides detailed circuit schematics of the board
Appendix B provides detailed circuit schematics of the daughter board
Appendix C is an index of the programmable devices
Appendix D is a summary of the switches, jumpers and links
Appendix E is a mechanical drawing of the ARM Development Card
1.1.1 Related Documentation
You may find it useful to refer to the following documents:
ARM IHI-0001 AMBA Specification
ARM DUI 0014 HP ARM Inverse Assembler User Guide
ARM DDI-0041 AMBA Arbiter
ARM DDI-0042 AMBA Decoder
ARM DDI-0043 AMBA Test Interface Controller
ARM DDI-0047 AMBA Interrupt Controller
ARM DDI-0048 AMBA Reset and Pause
ARM DDI-0049 AMBA Timer APB Peripheral
ARM DDI-0051 AMBA Reset Controller
ARM DUI 0061 Target Development System user Guide
ARM DDI 0062 Reference Peripherals Specification
1.2 Conventions
This manual employs typographic conventions intended to improve its ease of use.
code code which you need to enter, or which is provided as an example
hrg.book Page 2 Wednesday, July 22, 1998 9:18 AM