ASCOM D62 User Manual

TD 92477EN
8 April 2016 / Ver. M
User Manual
Ascom d62 DECT Handset
103
B.9 Troubleshooting
Problem Reason Solution
No barcode reader found Barcode reader is turned
off
Turn on barcode reader
1
1. For additional information, see the Manual for the Bluetooth barcode reader
Barcode reader is out of
battery
Charge barcode reader
1
Barcode reader is out of
range
Move barcode reader closer to
handset 
< 10 metre.
Barcode reader is not in
pairing mode
Turn barcode reader into pairing
mode
1
Pairing fails Barcode reader is not in
pairing mode
Turn barcode reader into pairing/
discoverable mode
1
Incorrect PIN entered Try again and enter correct PIN
1
Connecting fails/Failed to
connect barcode reader
Barcode reader is not
turned on
Turn on barcode reader
1
Barcode reader is out of
range
Move barcode reader closer to
handset
Link key in barcode reader
has been deleted
Repeat pairing procedure
1
Barcode reader is already
connected to another
handset
Disconnect barcode reader from the
other handset
Too close to disturbing
devices.
Disturbing devices can be WLAN
equipment, microwave etc.
Barcode reader can not
connect to handset (see
barcode reader manual
for details on how to
connect)
Handset is not turned on Turn on handset
Bluetooth module is
disabled
Enable Bluetooth in Bluetooth menu
Another barcode reader is
already connected to the
handset
Disconnect the connected barcode
reader
Link key is missing in
either barcode reader or
handset.
Repeat pairing procedure
1
Too close to disturbing
devices.
Disturbing devices can be WLAN
equipment, microwave etc.
Other faults/or if the
solutions do not work.
1) Switch the handset and barcode
reader
1
on and off. For additional
information, see
2) Perform a factory reset on the
barcode reader
1
.

ASCOM D62 Specifications

General

Brand	ASCOM
Model	D62
Category	Handsets
Language	English