TD 92477EN
8 April 2016 / Ver. M
User Manual
Ascom d62 DECT Handset
70
4 Select "On" or "On in charger" as required.
5Enter PIN code.
6Press "OK".
7 Press the "Back" soft key twice to return to the "Locks".
8 Select "Auto lock time".
9 Select the required lock time.
If the PIN code has been forgotten, it can be removed by the handset distributor.
Deactivate the Phone Lock
From the handset "Settings" menu:
1 Select “Locks”.
2 Select “Phone lock”.
3 Select “Auto phone lock”.
4 Select "Off".
5Enter PIN code.
6Press "OK".
Change PIN Code
From the handset "Settings" menu:
1 Select "Change PIN code".
2 Enter the old PIN code.
3Press "OK".
4 Enter new PIN code twice.
5 Press "Save".
8.8.4 Display Settings
Screen Saver
The screen saver can be set to one of the following settings:
• Information: Displays status and identification information while the handset is idle.
• Black: The screen is black when the handset is idle.
• Black also in call: The screen is also black when the handset is in call.
To set the screen saver:
1 Select “Display” from the handset menu.
2 Select “Screen saver”. The current setting is displayed under "Screen saver".
3 Select “Information”, “Black”, or “Black also in call”.
4 Press "Back".
NOTE: When charging the handset in an advanced charger or rack charger, information is
replaced by the large license indicator shield. When in the desktop charger it is the same as
when out of the charger.
NOTE: When the handset with the screen saver set to "Information" is in a charger, the
Owner ID is displayed even if the handset switched off. This simplifies identification when
many handsets are in a charging rack.
To Next Page
Loading...
Need help?
General
