ASCOM D62 User Manual

TD 92477EN
8 April 2016 / Ver. M
User Manual
Ascom d62 DECT Handset
68
Turn the Vibrator On or Off
If the vibrator is activated, it vibrates on incoming calls and messages. In addition, the
vibrator can also be activated when receiving a message during a call. See the
Configuration
Manual, Ascom d62 DECT Handset, TD 92639EN for more information.
1 Select “Vibrator alert”. Choose between “On”, “On if silent” (that is, the vibrator is on
when the handset is muted), or “Off”.
2 Select vibrating alert.
3 Press "Back".
Set the Key Sound
This means that every time a key is used, the handset gives a small sound.
1 Select “Key sound”. Choose between “Silent, “Click”, or “Tone”.
2 Select key sound.
3 Press "Back".
To listen to the key sound, press the soft key "Play".
8.8.2 Keypad Lock Settings
The handset keypad can be locked automatically to minimize the risk of accidentally
pressing keys or buttons while the handset is not in use. The keypad is automatically locked
after a lock time parameter "Auto lock time" expires.
NOTE: The alarm button can be pressed while the keypad is locked. Any one of five
predefined emergency numbers can also be called while the keypad is locked as long as this
feature has been configured in the PDM/Device Manager. For additional information, see the
Configuration Manual for the Ascom d62 DECT Handset.
The automatic key lock can be configured by the administrator in the PDM/Device Manager.
For additional information, see the
Configuration Manual for the Ascom d62 DECT Handset.
The user may also configure the automatic key lock as described in the following sections.
Automatic key lock: One of the following options may be configured:
"On": the keypad is automatically locked if it is not used before the specified lock time
elapses.
"On, except calls": the keypad is automatically locked if it is not used for the specified lock
time. If the user is in call when the lock time elapses, the keypad remains unlocked until the
user has completed the call.
"Off": the keypad is never automatically locked.
Auto lock time: specifies the time that elapses before the keypad is automatically locked.
The shortest time that may be specified before the key lock is applied is 5 seconds and the
longest time is 3 minutes.
Auto key unlock: the keypad is automatically unlocked when a call or message is received.
When the user has serviced the call or message, the key lock is reapplied after the specified
automatic lock time expires.

ASCOM D62 Specifications

General

Brand	ASCOM
Model	D62
Category	Handsets
Language	English