ASCOM D62 - Time and Date Settings

TD 92477EN
8 April 2016 / Ver. M
User Manual
Ascom d62 DECT Handset
71
Brightness
1 Select “Display”.
2 Select “Brightness”.
3 Select “Normal” or “Power save”.
4 Press "Back".
Contrast
1 Select “Display”.
2 Select “Contrast”.
3 Increase/decrease the contrast by pressing
and on the Navigation key.
4Press "OK".
5Press "Back"
8.8.5 Time and Date Settings
The time and date displayed in the handset cannot
be changed by the user. The DECT
system is solely responsible for keeping the time. The handset also synchronises with the
DECT system time when:
• The handset is turned on after having been tu
rned off. The handset requests the current
DECT system date and time.
• The handset remains on for longer than 24 hours. The handset requests the
DECT system
time every 24 hours from the time it was last turned on.
The time and date formats displayed in the handset can be changed by the user as
descr
ibed in the following sections.
Set Time Format
1 Select "Time & Date" and press "Select".
2 Select Time format. The actual time format
is displayed. Selectable time format:
• 12:00 (AM/PM)
• 24:00
3 Press "Select" to save the setting.
Set Date Format
1 Select “Time & Date” and press "Select".
2 Select “Date format”, press "Select". Selectable date format:
• DD/MM/YYYY, for example, 17/09/2009 (also called Eur
ope)
• MM/DD/YYYY, for example, 9/17/2009 (also called US)
• YYYY-MM-DD, for example, 2009-09-17 (ISO 8601)
• MMM DD YYYY, for example, Sep 17 2009
• DD MMM YY, for example, 17 Sep 09
• DD.MM.YYYY, for example, 17.09.2009
• DD-MM-YYYY, for example, 17-09-2009
3 Press "Select" to save the setting.