EasyManuals Logo

ASCOM D62 User Manual

ASCOM D62
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #76 background imageLoading...
Page #76 background image
TD 92477EN
8 April 2016 / Ver. M
User Manual
Ascom d62 DECT Handset
69
Activate the Automatic Key Lock
The user activates the automatic key lock and sets the Auto lock time from the handset
"Settings" menu in the following way:
1 Select “Locks”. The "Locks" menu is displayed.
2 Select "Automatic key lock" menu item and select "On" or "On except calls".
NOTE: The current key lock setting is displayed under the "Automatic key lock" menu
item.
3 Press the "Back" soft key to redisplay the "Locks" menu.
4 Select "Auto lock time" and press the "Select" soft key.
5 Select the required lock time and press the "Select" soft key.
Deactivate the Automatic Key Lock
1 Select “Locks”. The "Locks" menu is displayed.
2 Select "Automatic key lock" and select "Off".
Automatic Key Unlock
The user can configure a locked keypad to unlock automatically when a call or message is
received. After the user has serviced the call or message, the keypad is locked again after
the specified Auto lock time expires.
8.8.3 Phone Lock Settings
The handset can be protected for unauthorized use by activating the phone lock. The phone
lock may be set to:
"On": The handset is automatically locked if not used for the specified automatic lock
time or when it is first turned on.
"On in charger": The handset is locked immediately when placed in the charger. When
removed from the charger and unlocked by the PIN, the handset remains unlocked
"Off": The handset is never locked.
The default phone lock PIN code (0000) can be changed to any 4 to 8 digit personalized
code.
The length of time before the handset locks automatically is set by the "Auto lock time"
parameter. The shortest time that can be set before the handset locks is 5 seconds and the
longest time is 3 minutes.
NOTE: If configured in the PDM/Device Manager, any one of up to five emergency numbers
can be called while the handset is locked. See the
Configuration Manual for the Ascom d62
DECT Handset.
Activate the Phone Lock
The phone lock settings are activated from the handset "Settings" menu in the following
way:
1 Select “Locks”.
2 Select “Phone lock”.
3 Select “Auto phone lock”.

Table of Contents

Other manuals for ASCOM D62

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ASCOM D62 and is the answer not in the manual?

ASCOM D62 Specifications

General IconGeneral
BrandASCOM
ModelD62
CategoryHandsets
LanguageEnglish

Related product manuals