TD 92477EN
8 April 2016 / Ver. M
User Manual
Ascom d62 DECT Handset
84
Figure 16. Easy replaceable battery, unlock the lid and remove the battery.
15.2 Easy Replacement of Handset
Easy replacement can be used if a handset needs to be replaced due to, for example, a
broken display. The easy replacement procedure is done via the handset display and the DC4
Advanced Desktop Charger, or the CR3 Rack Charger.
The following settings are replaced d
uring easy replacement:
•DECT registration
• User parameters (including User ID)
•Contacts
• The extension number is assigned to the new handset.
The following settings are not repla
ced during the easy replacement:
• Call list
• Messages
• Bluetooth pairing list
• Licenses.
15.2.1 Before Starting Easy Replacement Procedure
1 Check that both the old handset to be replaced and the new replacement handset are
of the same d
evice type (d62).
NOTE: The Easy Replacement procedure can be used i
f the old and new handsets have
different product licenses, that is, Talker, Messenger, and Protector. The new handset
product license is not replaced by the old handset’s product license during the
procedure. However, a handset product license, or license dependent functions can be
moved to another handset using the PDM/Device Manager.
2 Check that the software of d62 is of version
2.8.19 or greater, by entering *#34# in
idle mode.
3 Use the PDM to check that the software of CR3 Rack Charger
or DC4 Advanced
Desktop Charger is of version 1.3.x or greater. For more information on how to use
the PDM, see the Installation and Operational Manual for the Portable Device
Manager (PDM), Windows version.
4 Make sure that the handset batteries are charged before starting the easy
r
eplacement procedure.
5 Switch off the new handset by long pressing
.
To Next Page
Loading...
Need help?
General
