TD 92477EN
8 April 2016 / Ver. M
User Manual
Ascom d62 DECT Handset
76
12 System Handling
12.1 Software Upgrade and Additional Features
Software and parameters in the handset d62 can be upgraded by using the PDM or the
IMS3/Unite CM. See the Installation and Operation Manual for the Portable Device Manager
(PDM) Windows Version, or the Installation and Operation Manual for IMS3/Unite CM.
Examples of additional features that can be downloaded/conf
igured via PDM/Device
Manager:
• Company phonebook
• Downloadable languages
• Customizing the Menu Tree
• Licenses (the licenses can also be added v
ia the Admin menu in the handset)
Refer to the Configuration Manua
l for the Ascom d62 DECT Handset for more information.
To view the handset’s software vers
ion, enter *#34# in idle mode.
12.2 Handset Updates via Charging Rack
From time to time, users are instructed to leave their handsets in a central charging rack to
allow the handset to be updated with new features and functions. An ongoing update is
indicated by the
in the handset header bar and an "Updating handset" message is
displayed in the active area.
During the update, a message is d
isplayed to indicate that an update is in progress as shown
in figure 14. The "OK" soft key can be selected to close the message.
13:00
2013-02-07
System A
OK
Harald
Updating handset..
Figure 14. Handset Update while in Charger
If the handset removed from the charger and used, the upd
ate is suspended and resumed
when it is returned to the charger.
To Next Page
Loading...
Need help?
General
