ASCOM D62 - General System Settings and Customization

TD 92477EN
8 April 2016 / Ver. M
User Manual
Ascom d62 DECT Handset
67
View Last Search Result
1 Select "Last result". Only the last r
esult is displayed.
8.8 Settings
1 Enter the menu by pressing the “Menu” Soft key, or the confirmation button on the
Navigation key.
2 Select
in the menu, see 3.8 Settings on page 20.
8.8.1 Sound and Alert Settings
Adjust the Ring Volume
1 Select "Sound & Alerts.
2 Select “Volume”.
3 Step with
to increase the volume and with to decrease it. Press Back to save the
setting.
NOTE: If a handset restriction is enabled, it migh
t not be possible to set the ring volume to
"Silent". See Configuration Manual, Ascom d62 DECT Handset, TD 92639EN.
Set different Ring Signals for Calls
1 Select “Sound & Alerts”.
2 Select “Ring signals”.
Different signals for inter
nal calls, external calls and call back can be set.
3 Select "Internal call", "External call", "Call
back" or "PTT". The handset has 14 different
ring signals.
4 Select sound. To listen to the different sounds, press "Play"
.
NIOTE: Additional ring signals might be selectab
le if them are configured via PDM. See the
handset’s Configuration Manual for more information.
5 Press "Back".
Set Alerts for Messages
1 Select “Message alert”. Different message al
erts can be selected. The handset has 8
different message alerts by default, see 3.8 Settings on
page 20.
2 Select message alert from list. Pres
s "Play" to listen to the different sounds. 

TIP: The option Custom sounds should
be selected to create a customized message
alert. See the handset’s Configuration Manual for more information.
NOTE: The "Play" soft key is not available for Enhanced beep and Cust
om sound.
Instead, send a message to the handset to listen to the sound.
3 Press "Back".
TIP: By default, the message volu
me follows the ring volume setting. However, a different
message volume can be set if required. See Configuration Manual, Ascom d62 DECT Handset,
TD 92639EN.