ASCOM D62 User Manual

TD 92477EN
8 April 2016 / Ver. M
User Manual
Ascom d62 DECT Handset
66
8.7.3 Edit Contact
1 Select "Edit contact".
2 Select contact, and press "Edit" twice.
3 Enter new name/number, and press "OK".
Tip: A variable or the character U can be added to the Work/Mobile/O
ther number
field to allow the user to enter additional numerical characters before calling the
number. See 9 Procedure Call on
page 73 for more information.
4 Press "Save".
8.7.4 Set Ring Signal for a Contact
A specific ring signal can be set for each contact.
1 Add/edit a contact according to 8.7.2 Add Contact on pa
ge 65 or 8.7.3 Edit Contact
on page 66.
2 Select "Ring signal"
3 Select the ring signal to be used
for the selected contact.
4 Press "Back" and the press "Save".
8.7.5 Delete Contact
1 Select "Delete contact".
2 Select contact, and press "Delete".
3 Press "Yes" to confirm.
8.7.6 Central Phonebook
In the Central Phonebook can be searched by name or number. The last search res
ult can be
displayed.
When the search result is returned the contact informa
tion can be viewed. A number can be
assigned to the new contact and a message sent by selecting the "More" soft key. The
number can also be called by selecting the "Call" soft key.
1 Select "Central phonebook".
Search by Name
1 Select Search by name.
2 Enter First name and/or Last name.
TIP: When searching for a contact, adding and editing a contact, the input language can be
chan
ged temporarily by long pressing
. This can be used to temporarily access
characters in a foreign language.
3 Select "Search". The search result is displayed.
Search by Number
1 Select "Search by number".
2 Enter handset number, select "Search". The search result is displayed.

ASCOM D62 Specifications

General

Brand	ASCOM
Model	D62
Category	Handsets
Language	English