ASCOM D62 User Manual

TD 92477EN
8 April 2016 / Ver. M
User Manual
Ascom d62 DECT Handset
32
5.4.15 Answering Call Waiting
Depending on system setup and configuration, this feature m
ight be handled in one of two
different ways:
Method 1
During an ongoing conversation and a short tone for an
other incoming call appears, do as
follows:
1 Press the soft key "More" during the call.
2 Select "Answer Call waiting".
3 Press "Select". The new call is now conne
cted, and the first call is on hold.
When the line is free, the call on hold is a
utomatically dialled again. This is a system
dependent feature.
Method 2
If a second caller calls during a phone call, the ha
ndset beeps and display the text "Internal
call" for internal callers and "External call" for external callers. The handset also displays the
name or phone number of the second caller. To answer the second caller:
1 Press the soft key "Accept".
The text "Switch" briefly appears on screen, and the ha
ndset transfers to the second call.
The first call is put on hold.
2 When finished speaking with the first caller, select the "More" soft key.
3 Select "End Call".
The second call is closed and the first call is retrieved.
NOTE: A second call can be rejected by pressing the "Decline
" soft key. The second caller
hears an engaged tone. The call is logged as a missed call in the handset.
5.4.16 DTMF
NOTE: This option is only visible if configured in the
handset, see the Configuration Manual
for more information.
Some systems and PBXs require that the handset send
s Dual Tone Multi Frequency (DTMF)
when pressing the keys. DTMF can be enabled as follows:
1 Press the soft key "More" during the call.
2 Select "DTMF".
3 Press "Select". This enables DTMF signals to be used.
TIP: The handset can also be configured
to send DTMF when pressing and pressing
releasing
. See the handset’s Configuration Manual. This is not applicable for d62
Talker.

ASCOM D62 Specifications

General

Brand	ASCOM
Model	D62
Category	Handsets
Language	English