ASCOM D62 - Call Contact; Add Contact

TD 92477EN
8 April 2016 / Ver. M
User Manual
Ascom d62 DECT Handset
65
1 Enter the menu by pressing the “Menu” Soft key, or the confirmation button on the
Navigation key.
2 Select
in the menu, see 3.2 Contacts on page 16.
8.7.1 Call Contact
1 Select "Call contact".
2 Select contact from the list, or enter nam
e or number in the search field.
3 Press the Soft key "Call".
The contact can also be edited and a message sent
by selecting "View" > "More".
8.7.2 Add Contact
1 Select "Add contact".
Add New Contact
1 Select "New".
2 Select "Add", and enter the name of the contact.
3Press "OK".
4 Select "Work Number"/"Mobile number"/"Other number".
5 Press "Add".
6 Enter handset numbers.
Tip: A variable or the character U can be added to the Work/Mobile/O
ther number
field to allow the user to enter additional numerical characters before calling the
number. See 9 Procedure Call on
page 73 for more information.
7Press "OK".
8 Press "Save".
NOTE: A specific ring signal can be set for each contact, s
ee 8.7.3 Edit Contact on page 66
Add from Call List
1 Select "From call list".
2 Select number.
3 Press "Add".
4 Select number type.
5 Press "Select".
6 Press "Add", and enter name for the contact.
7Press "OK".
8 Press "Save".
NOTE: A specific ring signal can be set for each contact, s
ee 8.7.3 Edit Contact on page 66