ASCOM D62 User Manual

TD 92477EN
8 April 2016 / Ver. M
User Manual
Ascom d62 DECT Handset
39
any button. You can also close a message to immediately see the next message in the
message queue.
The messages that are not closed are put last in the message queue and remain in the
message queue until they are closed. They are shown as unread in the message list and are
not shown as read until they have been closed.
See Configuration Manual, Ascom d62 DECT Handset, TD 92639EN for more information
how to set the parameters.
6.6 Message Priority and Call Priority
NOTE: This feature requires settings in the PDM/Device Manager, see Configuration Manual,
Ascom d62 DECT Handset, TD 92639EN. This feature is applicable for d62 Messenger and
d62 Protector only.
On incoming calls, the call information dialog is always visible in front of a message by
default. The default can be overridden so that messages with a certain priority can be
displayed without being interrupted by the call. By setting a call priority, the handset
compares the call priority with the message priority to determine which information is to be
displayed, that is, the call information dialogue or the message. If the message priority and
the call priority are equal, the message is displayed.
6.7 Interactive Messaging
NOTE: This system dependent feature is applicable for d62 Messenger and d62 Protector
only.
Interactive Messaging (IM) is a function that extends basic messaging. It lets a handset user
access information from a client application in the system.
An example can be a customized application that can be accessed from the handset. A list of
actions can be included in the message sent from the application to the handset.
An IM is indicated and viewed the same way as an ordinary message, see 6.3 Receive a
Message on page 34. It is saved along with other messages in the message list.
NOTE: The indication of an IM can differ from an ordinary message depending on the
settings in the IM. The application that sends the IM can determine the alert signal volume
and LED indication.
When a IM has been read, the IM may display several options. Mark the one required and
press “Select”. If the selected option requests input, enter the information needed and press
“Ok”. A press on the middle soft key changes to digit or text input mode depending on
whether it is digit or text format in the message.
A read message is indicated the same way
as an ordinary message.
NOTE: If a handset receives an IM update when the original message already has been
deleted, the handset automatically sends a negative acknowledge (NAK) to the system, if
requested.
A very simple interactive message can look like the one in figure 6 on page 40. The options
depends on the configuration in the client application.

ASCOM D62 Specifications

General

Brand	ASCOM
Model	D62
Category	Handsets
Language	English