ASCOM D62 - Write New Messages; Unsent Messages; Sent Messages

TD 92477EN
8 April 2016 / Ver. M
User Manual
Ascom d62 DECT Handset
62
8.5.2 Write New Messages
1 Select "Write new message".
2 Enter text, and press "Send". See also 6 Messaging on page 34.
The message can be saved and sent later by pressing the soft key "Back" and
selecting "Yes". The message is stored under Unsent messages. See
8.5.3Unsent
Messages.
3 Enter number, or press middle soft key to get number from contact list.
4 Press "Send".
8.5.3 Unsent Messages
1 Select "Unsent" to view the list.
2 Select message to edit/send.
3 Select "Edit", edit text and/or just select "Send".
Delete/Delete All
1 Select "More".
2 Select "Delete" or "Delete all".
3 Select "Yes" if the unsent message shall be deleted.
8.5.4 Sent Messages
1 Select "Sent" to view the list.
2 Select "View".
Forward message
1 Enter additional text if needed.
2 Enter number.
3 Select "Send".
Delete Message
1 Select "Delete".
2 Select "Yes" to delete the message.
Delete/Delete All
1 Select "More".
2 Select "Delete" or "Delete all".
3 Select "Yes" if the unsent message shall be deleted.