TD 92477EN
8 April 2016 / Ver. M
User Manual
Ascom d62 DECT Handset
47
8 Menu Operation
13:00
Messaging
Select Back
Connections
Services
Profiles
Contacts
Settings
Short cuts
Calls
Figure 8. The main menu.
8.1 Connections
1 Enter the menu by pressing the “Menu” Soft key, or the confirmation button on the
Navigation key.
2 Select
in the menu, and press the confirmation button or the Soft key "Select".
8.1.1 Bluetooth
Bluetooth is optional, this function is only visible in the menu if
Bluetooth is ordered with
the handset. See also Appendix A.
Enable Bluetooth Connection
1 Select "Bluetooth".
2 Select "Enable". A Bluetooth connection icon
is displayed in the header bar.
Disable Bluetooth Connection
1 Select "Bluetooth".
2 Select "Disable".
Pair/Connect Bluetooth Headset
In order to use a Bluetooth headset, it must first be paired with t
he handset. It is only
needed to pair the Bluetooth headset once. A paired Bluetooth headset is automatically
connected, which is indicated by the icon
in front of the headset.
1 Set the Bluetooth headset in pairing mode, see the user manual for the Bluetooth
headset.
2 Enable Bluetooth, see Enable Bluetooth Connection.
3 Select "Bluetooth".
4 Select "Headset".
5 Select "Add new". An information text "Put headse
t in Pairing mode" is displayed.
6 Press "OK". It now searches for a Bluetooth headset for connection.
7 When headset is found, press "Pair".
To Next Page
Loading...
Need help?
General
