TD 92477EN
8 April 2016 / Ver. M
User Manual
Ascom d62 DECT Handset
53
8.2.2 Missed Calls
NOTE: The dialog window that appears for a misse
d call can be turned off. The handset can
also be prevented from storing calls in the call list. The latter feature can for example be
used to ensure privacy for users sharing the same handset. These features require
configuration in the handset via PDM/Device Manager.
When a missed call dialog window is shown, the use
r can view the missed calls by pressing
"Yes". If the user presses "No", the missed calls can be viewed as follows:
1 Enter the menu by pressing the “Menu” soft key,
or the confirmation button on the
Navigation key.
2 Select
in the menu, and press the confirmation button or the Soft key "Select".
3 Select "Missed calls", and step with th
e and to scroll in the list.
4 Press the Soft key "Call" to call back.
As in Call List there is a Soft key "More" which
can be used to view the time/date of the call,
edit the received number, add to contacts, delete received numbers. See 8.2.1 Call List on
page 52 for information about the functionality in Soft key "More".
NOTE: If supported by the system, the number’s c
ontact name can be displayed in the call
list.
8.2.3 Call Time
The total time of the previous call and last call is displayed.
1 Select "Call time".
8.2.4 Push to Talk
NOTE: This function is applicable for d62 Messenger
and d62 Protector only.
The push-to-talk (PTT) function can be described as a group or conference call to a
predefined group of m
embers. If one of the group members wants to get in contact with the
others, he or she presses and holds the PTT button
to open the microphone.
NOTE: The d62 Messenger handset multifunction button may also be configured to serve as
the
PTT button. This makes it easier for users who may have to wear gloves because of dress
or other requirements. Because the multifunction button is larger than the PTT button and
found on top of the handset, it is easier to locate and use compared to the smaller PTT
button at the side of the handset.
NOTE: Some legacy systems/PBXs require that the h
andset sends a predefined DTMF tone
when pressing/releasing
. See the handset’s Configuration Manual for more
information.
To participate in the conference, the group members
must first accept an invitation received
as an incoming call or as a text message. See 8.2.5 Accept an Invitation on
page 54.
If a member declines an invitation, he or she can re-join the group or conference later on. See
8.2.8 Re-join a Group on
page 56.
A user can also invite a group of members to partic
ipate in a conference call by calling a PTT
group, see 8.2.7 Call a PTT Group on
page 56.
To Next Page
Loading...
Need help?
General
