ASCOM D62 - Automatic Alarm Response Configuration

TD 92477EN
8 April 2016 / Ver. M
User Manual
Ascom d62 DECT Handset
46
7.5 Automatic Call after Alarm
A handset can be setup to call a predefined number after an alarm has been sent. The
number can also be dialled without sending an alarm by pressing a push-button that is not
configured with alarm functionality. Depending on the settings, the call can be established
in the following modes;
• Loudspeaking mode, or
• Monitor mode, or
• Normal mode
See the Configuration Manual for the Ascom d62 DECT Handset for more information.