ASCOM D62 User Manual

TD 92477EN
8 April 2016 / Ver. M
User Manual
Ascom d62 DECT Handset
43
Redisplay the Message and Terminate the Call
1Press
. The call is terminated and the ongoing call summary details are replaced
by the redisplayed text message.
6.13 Mobile Data
NOTE: This is a system dependent feature for d62 Messenger and d62 Protector only.
6.13.1 Send Mobile Data
User entered data can be sent from the handset by pressing a pre-programm
ed Hot key or
Soft key, or selecting a Service. Mobile data can be used for opening a door, starting/
stopping a machine etc. The data can either be predefined, or entered after the Hot key/Soft
key is pressed or Service is selected.
The data can be predefined when program
ming the Soft/Hot key or Service, see 8.3.1 Define
Soft Keys on
page 58, 8.3.2 Define Hot Keys on page 59, or 8.4.1 Add Services on page 60.
6.13.2 Send Mobile Data with a Prefix
Mobile data with a prefix is sent from the hand
set by entering data and then pressing a pre-
programmed Hot key or Soft key or select a Service. Mobile data with prefix can be used to
send information to an application in the system.
The prefix is predefined by the user when progra
mming the Hot/Soft key or Service, 8.3.1
Define Soft Keys on
page 58 on page 46 or 8.3.2 Define Hot Keys on page 59.
6.14 Send Data with Bluetooth Barcode Reader
The handset can be configured to receive data from a Bluetooth barcode reader and then
send the data to another destination. When the handset receives data, it is automatically
transmitted to the destination and is not stored in the handset. A dialog window "Message
sent" is displayed.
For more information about configuration, see
the Configuration Manual for the Ascom d62
DECT Handset. See also Pair and Connect Bluetooth Barcode Reader on
page 48, and user
manual for the Bluetooth barcode reader.
6.15 Voicemail
NOTE: This feature is only available if configured in the system.
6.15.1 Receive a Voicemail
When receiving a voicemail, the content of the
voicemail notification is displayed
automatically on the screen, and is also indicated by the "Voicemail message" icon
in
the status bar.
If the content of the notification is displayed, press "Call" to dial the voicema
il. If "Close" is
selected, the voicemail can be dialled by a long press on digit key "1" in standby mode, or
from the Inbox menu.
Information is stored in t
he “Messaging” inbox (see 3.4 Messaging on page 17) until all
voicemail messages have been listened to.

ASCOM D62 Specifications

General

Brand	ASCOM
Model	D62
Category	Handsets
Language	English