ASCOM D62 User Manual

TD 92477EN
8 April 2016 / Ver. M
User Manual
Ascom d62 DECT Handset
30
5.4.9 End a Call
Prerequisite,
a new call has been started during conversation, see 5.4.7 Start a New Call
during Conversation on
page 29.
NOTE: This option is only visible if configured in the
handset, see the Configuration Manual
for more information.
1 Press the soft key "More" during the call.
2 Select "End Call".
3 Press "Select". This ends the current cal
l and the previous call is resumed.
5.4.10 Transfer a Call
Prerequisite,
a new call has been started during conversation, see 5.4.7 Start a New Call
during Conversation on
page 29.
NOTE: This option is only visible if configured in the
handset, see the Configuration Manual
for more information.
When a caller has two ongoing calls, he or she can transfer t
he first call with the second call.
1 Press the soft key "More".
2 Select "Transfer".
3 Press "Select". This connects the first call wit
h the second call. Your call is
automatically disconnected.
5.4.11 Transfer to New Call
An ongoing call can be transferred to a new num
ber. When the new call is established, the
caller that initiated the transfer is disconnected.
NOTE: This option is only visible when the
parameters "New call" and "Transfer" are defined
in the handset. See the Configuration Manual for more information.
1 Press the soft key "More" during the call.
2 Select "Transf. to new".
3 Press "Select".
4 Enter the number of the person where the on
going call is to be transferred or
press
to access the phonebook.
5Press
to transfer the call. Your call is disconnected automatically.

ASCOM D62 Specifications

General

Brand	ASCOM
Model	D62
Category	Handsets
Language	English