ASCOM D62 User Manual

TD 92477EN
8 April 2016 / Ver. M
User Manual
Ascom d62 DECT Handset
49
8.1.3 System
The handset can subscribe up to eight different system
s.
Change System
Select “Automatic” or a specific system. If the handset i
s set to “Automatic” it selects a
system according to the priority list, see Priority on
page 50.
Subscribe Handset in IP-DECT System using Easy Registration
A handset can subscribe to an IP-DECT system au
tomatically if the following are fulfilled:
• The IP-DECT system is configured for Easy Registration,
see the corresponding
Installation and Operation manual for the IP-DECT system.
• The handset’s IPEI is registered in the IP-DE
CT system, see the corresponding Installation
and Operation manual for the IP-DECT system.
• The handset is not subscribed to any systems.
• The handset software is 3.2.x or greater.
1 If needed, switch off the handset by pressing
.
2 Switch on the handset by pressing
.
3 Select language to be used or press "Cancel". If Cancel is pressed, the d
efault
language English is used.
4 The handset starts to search for IP-DECT systems. When a system is found the
handset subsc
ribes to it.
NOTE: If no system is found within 2 minutes or "Ca
ncel" is pressed, the handset returns to
the System menu. If this is the case, continue with Subscribe Handset in IP-DECT System
Manually.
Subscribe Handset in IP-DECT System Manually
To subscribe an IP-DECT system manually, the “Park:
” (Portable Access Right Key) and “Ac:”
(Authentication code) related to the system are needed. Contact the system administrator
for more information. If the handset has been subscribed in one system, additional systems
have to be subscribed manually.
NOTE: The PARK code may not be needed if there is no alien DECT system within the
coverage ar
ea.
The IPDI code is a unique code which has been assigned to the handset, see also 11.1 Admin
Menu on
page 75.
1 Select "System".
2 Select "Subscribe".
3 Press "Next".
4 Enter System name (optional). If no system
name is entered, the default name is
used. That is System A, System B etc. depending on which system name that is free.
5 Press "Next".
6 Enter PARK code (max. 31 digits). The PARK code may not b
e needed if there is no
alien DECT system within the coverage area.
7 Enter AC code. The AC code length must be between 4 - 8 digits.

ASCOM D62 Specifications

General

Brand	ASCOM
Model	D62
Category	Handsets
Language	English