TD 92477EN
8 April 2016 / Ver. M
User Manual
Ascom d62 DECT Handset
24
4.5 Lock and Unlock the Handset
The handset can be locked to prevent unauthorized use. If this function is activated, a PIN
code has to be entered for example to switch on the handset, to answer an incoming call etc.
The default phone lock code (0000) can be changed to any 4 - 8 digit personalized code.
NOTE: If a phone is shared and one of the users logs off th
e shared phone, the lock that
prevents the handset from unauthorized use is deactivated. For additional information, see
4.2 Log a Shared Phone On and Off on
page 22.
NOTE: The handset can be configured with predefined em
ergency numbers that can be
called while the handset is locked. See the handset’s Configuration Manual. For the d62
Protector, the Alarm button can also be used.
1 Enter the “Settings” menu.
2 Select “Locks”
3 Select “Phone lock”.
4 Select "Auto phone lock".
5 Select "On", "On in charger", or "Off".
4.6 Mute Handset on Incoming Call or Message
The handset can be muted temporarily on an incoming call or message. The call is not hung
up when the handset is muted. If the call is unanswered, it reverts to voicemail if the
handset has been configured for voicemail.
To mute an incoming call or message, press
or while the handset sounds.
To Next Page
Loading...
Need help?
General
