Atlas Copco Dynapac F3030C - Page 68

D11 6
Item
Designation
Brief description
6 Drive lever
Switching on the paver finisher,
forward or reverse can be
regulated by drive lever.
Zero position: engine can start;
engine at idling speed; no travel
drive
-Through releasing the interlock
switch, swivel the drive lever to
different working position.
Depending on the position of
the drive lever, the following
functions can be activated:
Forward position:
- Conveyor in AUTO mode,
auger in AUTO mode, screed
tamper in AUTO mode, screed
vibration in AUTO mode,