EasyManua.ls Logo

Atlas Copco FlexiROC T30 R - Technical Data

Atlas Copco FlexiROC T30 R
144 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FlexiROC T30 R 17 Winch
119 No: 3629357835.1.3629419915 en-US
17 Winch
17.1 Check Attachment of Winch Cable
WARNING
Risk of Tipping and Cable Failure
Can cause serious personal injury and damage to property.
u The anchorage point must be firm and secure.
u The safety hook must not slide or detach from the attachment point.
u Do not use a damaged cable or hook.
!
NOTE: It is important that the cable is correctly fitted in the winch eye.
A Cable
B Rope lock
C Connector sleeve with wedge plug
D Hook
Correct assembly:
n The cable must run in line with the eye on the connector sleeve.
n The rope lock must only lock the end cable.
n The free end must be at least 6-9 times the diameter of the cable in order to ensure
that the whole section of the cable that is either lashed-in or annealed and tapered is
outside the connector sleeve.
The cable and winch eye must be checked:
n before each use.

Table of Contents

Other manuals for Atlas Copco FlexiROC T30 R

Related product manuals