Atlas Copco FlexiROC T30 R Maintenance

FlexiROC T30 R 10 Hydraulic System
69 No: 3629357835.1.3629419915 en-US
10.8.2 Check Hydraulic Oil Filter
1.
Check to see if the needle on the pressure gauge Pressure in the return oil filter (B)
is in the red zone. If so, the filter must be changed. Contact Atlas Copco.
!
NOTE: The pressure gauge (B) Pressure in the return oil filter is
only reliable when the oil has reached a temperature of at least 40
°C (104 °F)
10.8.3 Replace Return Oil Filter
The filter inserts are located in the hydraulic tank.

Atlas Copco FlexiROC T30 R Specifications

General

Brand	Atlas Copco
Model	FlexiROC T30 R
Category	Construction Equipment
Language	English