Atlas Copco FlexiROC T30 R Maintenance

FlexiROC T30 R 7 Feed Unit
37 No: 3629357835.1.3629419915 en-US
7.13 Check Condition of Feed
n
Check for leaks on the feed cylinder (A).
n
Adjust tension, check lubrication, and leakage on the pull and return rope (B).
n
Check attachment and function on the limit switches (C).
n
Check lubrication and wear on the intermediate drill rod support bearing (D). Replace
if necessary.
n
Check for damage and wear on the feed beam (E).
n
Check attachment and tightness of bolted joints on the rock drill (F).
n
Check wear, tension, and lubrication on the hydraulic hoses (G).
n
Check lubrication and wear on the water hose drum bearings (H).
n
Check attachment, play, wear, and damages on the rock drill cradle (I).
n
Pump lubricant into 14 grease nipples on the rod handling system (J).
n
Check for wear on the drill rod support halves (K).
n
Check tightening on the bolted joints (L).
7.14 Lubricate Rod Handling
This equipment is optional.

Atlas Copco FlexiROC T30 R Specifications

General

Brand	Atlas Copco
Model	FlexiROC T30 R
Category	Construction Equipment
Language	English