Atlas Copco FlexiROC T30 R Maintenance

FlexiROC T30 R 11 Diesel Engine
84 No: 3629357835.1.3629419915 en-US
11.15.2 Check Air Filter Indicator Function
!
NOTE: Check that no dirt or other particles enter the filter housing.
1.
Remove the air intake's cover on the filter housing.
2.
Let the engine idle.
3.
Gradually cover part of the air intake. Use a piece of board or similar.
4.
Check that the indicator alarm comes on.
è
If an alarm is not indicated, check cable connections. If there are no problems
with the connections, then the indicator (A) is faulty and must be replaced.
5.
Stop the engine and reset the indicator (A) by pressing the button on the indicator.
6.
Install the air intake's cover.

Atlas Copco FlexiROC T30 R Specifications

General

Brand	Atlas Copco
Model	FlexiROC T30 R
Category	Construction Equipment
Language	English