Atlas Copco FlexiROC T30 R Maintenance

FlexiROC T30 R 9 Dust Collector
58 No: 3629357835.1.3629419915 en-US
2.
Loosen the four bolts to each filter lid.
3.
Lift the whole unit with both filter lids. Grab the strip and lift out the old filters.
4.
Replace with new filters.
!
NOTE: The filters are fastened by the filter lids that pushes down
the filters against a rubber sealing.
Tightening torque 18–20 Nm

Atlas Copco FlexiROC T30 R Specifications

General

Brand	Atlas Copco
Model	FlexiROC T30 R
Category	Construction Equipment
Language	English