4
4. Symbols of international standards (IEC)
Symbols Title and indication
Type B applied part
Indicates that the device is classified as Type B in terms of the degree of protection against elec-
tric shock.
See Operation Manual
Follow Operation Manual.
Type BF applied part
Indicates that the device is classified as Type BF in terms of the degree of protection against
electric shock.
See Operation Manual
Follow operation manual.
Date of manufacture
Indicates the date when the unit was manufactured in the factory.
Lighting
Indicates a switch that controls lighting.
Power
Indicates a switch to turn the power on or off.
Electrostatic discharge
Indicates a caution regarding electrostatic discharges.
Recycle mark
Indicates that recycling is recommended.
WEEE symbol
In the EC area, an electrical and electronic product falling in one of the categories specified by
“DIRECTIVE 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27
January 2003 on Waste Electrical and Electronic Equipment (WEEE)” should be disposed of in a
manner consistent with relevant laws and regulations.
This symbol indicates that the above-mentioned requirement applies to this product.
Manufacturer
This symbol indicates the name and the address shown adjacent to the symbol is of the manufacturer.
Authorised representative in the european community
This symbol indicates the name and the address shown adjacent to the symbol is of the authorised
representative in the European Community.
To Next Page
Loading...
