6
Symbol Title and indication
(Red marking)
Alarm
Indicates the inability to detect pulse during measurement. (For Nellcor pulse oximeter)
Alarm
Indicates an alarm related to an oxygen sensor.
Sensitivity setting indicator
Indicates that the sensitivity mode is set to “Max”. (For Masimo pulse oximeter)
Sensitivity setting indicator
Indicates that the sensitivity mode is set to “APOD”. (For Masimo pulse oximeter)
Pulse search indicator
Indicates that a pulse is being detected. (For Masimo pulse oximeter)
Interference indicator
Indicates that interference is detected. (For Masimo pulse oximeter)
Fast response mode indicator
Indicates that the response mode of the pulse oximeter is set to “Fast.” (For Nellcor pulse oxim-
eter)
Pulse search indicator
Indicates that a pulse is being detected. (For Nellcor pulse oximeter)
Interference indicator
Indicates that interference is detected. (For Nellcor pulse oximeter)
10kg MAX.
Load capacity
Indicates the maximum load capacity.
Gross weight
Indicates that the gross weight when peripheral devices of maximum loading capacity are at-
tached to the product is as inscripted.
Precautions on Jamming
The unit is intended for use in hospitals.
Portable and mobile communication equipment and other devices which generate high frequency
should be used at least 30cm away from the unit, including cables specified by the manufacturer.
Failure to do so may cause malfunction.
Note: The emission characteristics of this unit make it suitable for use in industrial areas or hospi-
tals (CISPR11 Class A). Take care when using the unit in residential environments (normally CIS-
PR11 Class B), as it may not provide adequate protection from wireless frequency communication
services. The user may also need to relocate or realign the unit to alleviate the problem.
To Next Page
Loading...
