AuCom EMX4i - Page 99

PROGRAMMABLE PARAMETERS
98 EMX4i User Manual 710-14888-00C
12M – IP Address 2
Range:
0 - 255
Default:
168
Description:
Sets the second component of the soft starter's IP address, for
Ethernet communications.
12N – IP Address 3
Range:
0 - 255
Default:
0
Description:
Sets the third component of the soft starter's IP address, for
Ethernet communications.
12O – IP Address 4
Range:
0 - 255
Default:
2
Description:
Sets the fourth component of the soft starter's IP address, for
Ethernet communications.
NOTE
The network address can also be set via the Network Address options in the
Setup Tools. Refer to
Network Address on page 38 for details.
12P – Subnet Mask
Range:
0 - 255
Default:
255
Description:
Sets the first component of the network subnet mask, for
Ethernet communications. The subnet mask is set using
parameters 12P~12S and the default mask is 255.255.255.0.
12Q – Subnet Mask 2
Range:
0 - 255
Default:
255
Description:
Sets the second component of the network subnet mask, for
Ethernet communications.
12R – Subnet Mask 3
Range:
0 - 255
Default:
255
Description:
Sets the third component of the network subnet mask, for
Ethernet communications.
12S – Subnet Mask 4
Range:
0 - 255
Default:
0
Description:
Sets the fourth component of the network subnet mask, for
Ethernet communications.
NOTE
The network address can also be set via the Network Address options in the
Setup Tools. Refer to
Network Address on page 38 for details.