Need help?Do you have a question about the AUDAC M2 and is the answer not in the manual?
General| Monitor out | 1 |
|---|---|
| Number of Euroblock input connectors | 20 |
| Number of Euroblock output connectors | 24 |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 20 W |
| DJ mixer | No |
| Rack capacity | 19U |
| Rack mounting | Yes |
| Channels quantity | - channels |
| Digital sound processing | - bit |
| Equalizer bands quantity | 5 |
Weight and Dimensions| Depth | 350 mm |
|---|---|
| Width | 482 mm |
| Height | 132 mm |
| Weight | 8850 g |
Introduction to the M2 as a Multi-Media Digital Audio Mixer and its capabilities.
Highlights the M2's DSP processors, input/output flexibility, and control options.
Visual representation of the M2's internal components and signal flow.
Critical safety guidelines for operating and handling the M2 unit.
Precautions for installation environment and proper disposal of electronic equipment (WEEE).
Explains connection standards for RCA, XLR, and Euro-Terminal Block audio interfaces.
Details on RJ45, RS232, and general system wiring best practices.
Specific rules for connecting speaker cables, wall units, sources, and Ethernet.
Description of the M2's front panel controls and interfaces, including optional touchscreen.
Detailed breakdown of rear panel connectors for audio inputs, outputs, and peripherals.
Instructions for connecting external audio devices and amplifiers to the M2.
Steps for setting up IP address, passwords, and connecting to a computer.
How to configure basic and all-in-one wall panels and assign inputs/scenes.
Guide to opening the web interface, logging in, and understanding the main screen.
Detailed settings for input mixing, ALC, EQ, filters, and voice files.
Configuration of output modes, delay, volume limits, linking, and quick menu settings.
Creating, naming, and recalling scenes for output presets and global scenes.
Managing timer schedules, paging volume levels, and priority settings.
Settings for external devices, network, passwords, time, and factory defaults.
Using the mobile app for remote control and configuration of the M2 mixer.
Overview of PI ports and supported peripheral devices like wall panels and paging consoles.
Specific setup and functions for DW3020/4020 and DW5065 wall panels.
Basic and advanced paging examples with APM consoles and priority management.
Settings for paging volume, relay control, and console configuration via web interface.
Explanation of the fiber optic ring network for cascading multiple devices.
Step-by-step guide for configuring IP addresses and connections in a cascaded setup.
Basics of TCP/IP, IP addresses, and network ranges for AUDAC products.
Importance and procedure for keeping the M2's software up-to-date.
Detailed technical data on M2 inputs, outputs, power, and physical dimensions.
To Next Page