AUDAC M2 - Password; Time

44
Settings >> System >> Password
InthiswindowthepasswordsfortheM2canbechanged.Therearetwodifferentpassword
levels.AdministratorlevelwhichhasfullaccesstoallfunctionsandUserlevel,whichonly
hasaccesstothebasicfunctions.
ThesettingsfortheAdministratorpasswordcanbechangedontheleftsideofthewindow,
whilethesettingsfortheUserpasswordcanbechangedontherightsideofthewindow.
Tochangethepassword,entertheoldpasswordintheprovidedfield,andenterthenew
passwordtwiceintheprovidedfields.Afterthisalliscompleted,pushthe“OK”button.
Whentheoldpasswordiscorrect,andthenewpasswordfilledinbothfields,matches,
theoldpasswordwillbechangedintothenewpassword.
M2 Password settings
STANDARD PASSWORD SETTINGS
Administratorpassword:“M2”
Userpassword:“user”
Settings >> System >> Time
ThecurrenttimeanddatefortheM2canbesetinthiswindow.Thesettimeanddatewill
beusedforsynchronisingprogrammedevents,eventlogging,...
Thetimeanddatesettingscanbeenteredmanuallybyselectingtherightvaluesfromthe
dropdownlist.Afterthecorrectvaluesareselected,the‘SetClock’buttonshouldbeclicked
andtheenteredtime&datewillbesaved.Theinternalreal-timeclockwhichisholding
thecurrenttimeanddatehasanaccuracyof1minute/month,meaningthesetvaluemay
expirewithamaximumof1minute/month.