User's Manual 118 Document #: LTRT-71405
MediaPack Series
6.5.2.9.3 Basic Configuration
To configure the Basic Configuration:
1. Open the MEGACO Basic Protocol Settings page (Configuration tab > VoIP menu >
Call Control > Basic Configuration).
Figure 75: MEGACO Basic Protocol Settings
2. Use the appropriate tables in the Product Reference Manual as a reference when
configuring/modifying the Basic Configuration parameter fields in the ‘Basic
Configuration’ page.
3. After configuring/modifying the parameter fields, click Submit. The changes are
entered into the system and the page is refreshed.
6.5.2.9.4 General Parameters
To configure the General Parameters:
1. Open the MEGACO General Protocol Settings page (Configuration tab > VoIP menu
> Call Control > General Parameters).
Figure 76: General Protocol Settings - MEGACO
2. Use the appropriate tables in the Product Reference Manual as a reference when
configuring/modifying the General Parameters, in the General Parameters page.
To Next Page
Loading...
