AUMA AM 01.1 - Default Chapter; Table of Contents

Read operation instructions first.
●
Observe safety instructions.
●
These operation instructions are part of the product.
●
Retain operation instructions during product life.
●
Pass on instructions to any subsequent user or owner of the product.
Purpose of the document:
This document contains information for installation, commissioning, operation and maintenance staff. It is intended
to support device installation and commissioning.
Reference documents:
Reference documents can be downloaded from the Internet (www.auma.com) or ordered directly from AUMA
(refer to <Addresses>).
Table of contents Page
51. Safety instructions.................................................................................................................
51.1. Basic information on safety
51.2. Range of application
61.3. Applications in Ex zone 22 (option)
61.4. Warnings and notes
71.5. References and symbols
82. Identification...........................................................................................................................
82.1. Name plate
112.2. Short description
123. Transport, storage and packaging........................................................................................
123.1. Transport
143.2. Storage
153.3. Packaging
164. Assembly................................................................................................................................
164.1. Mounting position
164.2. Handwheel fitting
164.3. Multi-turn actuator: mount to valve/gearbox
164.3.1. Output drive type A
174.3.1.1. Stem nut: finish machining
184.3.1.2. Multi-turn actuator (with output drive type A): mount to valve
194.4. Output drive types B and E
204.4.1. Multi-turn actuator with output drive types B: mount to valve/gearbox
214.5. Accessories for assembly
214.5.1. Stem protection tube for rising valve stem
224.6. Mounting positions of local controls
234.6.1. Mounting positions: modify
245. Electrical connection.............................................................................................................
245.1. Basic information
265.2. Electrical connection S/SH (AUMA plug/socket connector)
275.2.1. Terminal compartment : open
285.2.2. Cable connection
295.2.3. Terminal compartment : close
2
SA 07.2 – SA 16.2 /SAR 07.2 – SAR 16.2
Table of contents AM 01.1/AM 02.1