To Next Page

To Previous Page

5111.2. Type of seating: set

5211.3. Push-to-run operation or self-retaining: set

5311.4. Running indication (blinker transmitter): activate/deactivate

5311.5. Torque fault in collective fault signal: activate/deactivate

5311.6. LEDs for torque fault, phase failure, motor protection

5411.7. Positioner

5411.7.1. Input ranges (signal type) for setpoint and actual value

5511.7.2. Behaviour on loss of signal (actuator reaction)

5611.7.3. Adjustment in end positions

5811.7.4. Sensitivity setting

5911.8. EMERGENCY command (EMERGENCY - OPEN/EMERGENCY - CLOSE)

5911.9. Actuator controls: close

6112. Corrective action....................................................................................................................

6112.1. Faults during operation/commissioning

6112.2. Fuses

6112.2.1. Fuses within the actuator controls

6312.2.2. Motor protection (thermal monitoring)

6513. Servicing and maintenance...................................................................................................

6513.1. Preventive measures for servicing and safe operation

6613.2. Maintenance

6613.3. Disposal and recycling

6714. Technical data.........................................................................................................................

6714.1. Technical data Multi-turn actuators

7014.2. Technical data Actuator controls

7315. Spare parts.............................................................................................................................

7315.1. Multi-turn actuators SA(V) 07.2 – SA(V) 16.2/SAR(V) 07.2 – SAR(V) 16.2

7515.2. Actuator controls AM 01.1/AM 02.1

7716. Certificates..............................................................................................................................

7716.1. Declaration of Incorporation and EU Declaration of Conformity

78Index........................................................................................................................................

81Addresses...............................................................................................................................

SA 07.2 – SA 16.2 /SAR 07.2 – SAR 16.2

Table of contents AM 01.1/AM 02.1

AUMA AM 01.1 User Manual

Questions and Answers: