100
10 Settings
Access the Settings menu to adjust default settings and view information about the
MaxiTPMS system. The following options are available for the MaxiTPMS system
settings:
⚫ Unit
⚫ Language
⚫ Printing Settings
⚫ Report Settings
⚫ Push Notifications
⚫ Auto Update
⚫ TPMS Market
⚫ TPS Prog. Setting
⚫ Vehicle List
⚫ System Settings
⚫ About
This section describes the procedures to adjust the device’s system settings.
10.1 Unit
This option allows you to adjust the measurement unit for the diagnostic system.
➢ To adjust the unit setting
1. Tap the Settings application on the MaxiTPMS Job Menu.
2. Tap the Unit option on the left column.
3. Select the appropriate measurement unit, Metric or Imperial. A check icon will
display to the right of the selected unit.
4. Tap the Home button on the top-left corner to return to the MaxiTPMS Job
Menu, or select another setting option for system setup.
To Next Page
Loading...
