101
10.2 Language
This option allows you to adjust the display language for the MaxiTPMS system.
➢ To adjust the language setting
1. Tap the Settings application on the MaxiTPMS Job Menu.
2. Tap the Language option on the left column.
3. Select an appropriate language. A check will display to the right of the selected
language.
4. Tap the Home button on the top-left corner to return to the MaxiTPMS Job
Menu, or tap another setting to adjust.
10.3 Printing Settings
Configure this option to enable the tablet to print via network.
➢ To setup the printer connection
1. Tap the Settings application on the MaxiTPMS Job Menu.
2. Tap the Printing Settings option on the left column.
3. Tap Print via PC-link or Print via Wi-Fi to activate the printing function, which
enables the device to send files to the printer through the PC via Wi-Fi or
Ethernet connection.
4. Tap the Home button on the top-left corner to return to the MaxiTPMS Job
Menu, or tap another setting to adjust.
10.3.1 Printing Operations
If the Wi-Fi printer is not available, you can use your PC to print the data on the tablet.
Follow the instructions below to operate.
➢ To install the PC Link driver program
1. Download the Maxi PC Suite software from www.autel.com > Support >
Downloads > Autel Update Tools, and install it to your windows-based PC.
2. Double click on Setup.exe.
3. Select the installation language and the wizard will load momentarily.
4. Follow the instructions on the screen and click Next to continue.
5. Click on Install and the printer driver program will be installed onto the PC.
6. Click on Finish to complete the installation.
To Next Page
Loading...
