42
Figure 4-34 Automatic Relearn Screen 2
4.8.3 Stationary Relearn
Stationary Relearn can be completed without relying on driving and OBD diagnostics.
To activate this mode, it is usually necessary to perform a series of operations to let the
vehicle enter the relearn mode first, then use TPMS tools to perform activation or
deflation to complete the relearn. The Stationary Relearn operation procedures vary by
vehicle models. Please carefully read the on-screen Learning Process Guide before
performing Stationary Relearn.
NOTE
Stationary Relearn requires the vehicle to be placed in the “Learn Mode” after each new
sensor is triggered.
To Next Page
Loading...
