65
fault has been detected.
Not Scanned: Indicates the system has not been scanned.
Column 4 — tap to enter the related system to view the detailed information and
perform further diagnosis or testing.
5.5.1.3 Function Buttons
The table below provides a brief description of the function buttons.
Table 5-3 Function Buttons in Auto Scan
Displays the diagnostic data in a report form.
Deletes codes. A warning message screen will display
to inform you of possible data loss when this function is
selected.
Confirms the test result. Continues the system diagnosis
after a required system is selected by tapping the item in
the main section.
Suspends scanning and it will change to the Continue
button after tapping.
Returns to the previous screen or exits Auto Scan.
5.5.2 Control Unit
The Control Unit function allows you to manually locate a required control system for
testing through a series of choices. Follow the menu-driven procedures and make
proper selections. The program will guide you to the proper diagnostic function menu
based on selections.
To Next Page
Loading...
