➢ To use the camera
1. Tap the Camera icon. The camera screen opens.
2. Focus the image to be captured in the viewfinder.
3. Tap the camera icon on the right side of the screen. The viewfinder now
shows the captured picture and auto-saves the taken photo.
4. Tap the thumbnail image on the top-right corner of the screen to view the
stored images.
5. Tap the Back or Home button to exit the camera application.
NOTE
After swiping the camera screen from left to right, the camera mode and video
mode can be switched by tapping the Camera icon or Video icon.
3.1.3 System Status Icons
By tapping the bottom-right corner or sliding from the top of the screen, a Shortcut
Panel will be displayed, on which you are allowed to adjust various system settings for
the tablet. As the tablet is working with Android operating system, you may refer to
Android documents for more information.
3.2 Powering Down
All vehicle communications must be terminated before shutting down the tablet. A
warning message appears if you attempt to shut down the tablet while it is
communicating with the vehicle. Forcing a shut-down while communicating may lead to
ECU problems on some vehicles. Please exit the Diagnostics application before
powering down.
➢ To power down the tablet
1. Long press the Power/Lock button.
2. Tap Power off. The tablet will turn off in a few seconds.
To Next Page
Loading...
