44
NOTE
1. Ensure the original sensor will not interfere with the relearn procedures. It is
recommended that you keep the original sensor at least 100 meters away from the
vehicle or put the sensor in an enclosed metal box to avoid signal interference.
2. Normally, it is not necessary to perform relearn procedures after cloning. However,
some vehicle models like Porsche and Maserati, may need to perform the relearn
procedures after cloning, so that the TPMS system can work properly.
Figure 4-37 Copy Relearn Screen 1
Figure 4-38 Copy Relearn Screen 2
To Next Page
Loading...
