Avaya 9600 Series - Auto Lock

To Next Page

To Previous Page

Procedure

1. Press the Unlock soft key.

2. Enter your security PIN (login code).

3. Press the Done soft key.

Related links

Logging In/Out on page 115

Auto Lock

Rather than logging out, you can lock your phone. You can either lock your phone manually using

the steps below or have it automatically locked after a period of phone inactivity. To use this

feature you need a security PIN (login code) set.

When your phone is locked:

• It can only be used to make internal and emergency calls.

• None of the menus for your user settings can be accessed.

• Unlocking the phone requires your configured login code.

• Your system administrator can configure whether you can access this menu.

Procedure

1. Press the Features soft key if shown.

• To do this during a call, press the

PHONE key and then press Features.

2. Use the cursor keys to select Phone User.

3. Use the cursor keys to select Phone Screen Settings.

4. Use the up and down cursor keys to highlight Auto Lock (minutes).

5. Press the Change soft key to change the setting or use the left or right cursor keys.

• Disabled - Do not use the inactivity timer.

• 1/5/30/60 - Lock the phone after the indicated number of minutes.

6. Press the Save soft key.

Other manuals for Avaya 9600 Series