9650 Telephone
The system supports the 9650 and 9650C versions of the 9650 telephone.
This phone supports 24 programmable call appearance/feature buttons. The labels for 3 of these
buttons are visible on the main display and can be controlled by the adjacent buttons to the right.
You can use the up and down cursor keys to scroll the display. You can also use the left and right
cursor keys to move through the button features in pages of three.
In addition, the features for 16 of the 24 buttons (buttons 04 to 11 and 12 to 19) can be accessed
as using the auxiliary feature buttons below the display. They are shown in two pages of eight with
the SHIFT key next to the display used to switch between which page is being displayed at any
time.
Those programmable button not assigned as appearance buttons can be used for a range of other
features. The features can be programmed by you or your system administrator. Note however
that you may not be able to change the feature buttons set by your system administrator. Note
also that there are features that the system administrator can assign that are not available for you
to assign. This guide includes only the features that are available for you to assign if required.
The use of the button lamps depends on the feature associated with the button. Buttons
programmed with a feature that is not supported by the phone display as Invalid.
Introduction
April 2020 9600 Series Phone User Guide 18
Comments on this document? infodev@avaya.com
To Next Page
Loading...
