Chapter 15: Headset Operation
Your phone has a headset socket. This is suitable for the connection of phone headsets that
connect via a HIS headset cable.
• If there are no currently connected call, a call answered or made by pressing an appearance
button is connected either handsfree or through the headset according to the phone's audio
path setting. See Default Handsfree Audio Path on page 85. The same applies to dialing a
new call.
• If there is already a connected call to which you are talking through the headset, answering
another call by pressing the appearance button answers that call using the headset.
Related links
Using a Heaset on page 84
Headset Caller Volume on page 85
Automatic Gain Control on page 85
Default Handsfree Audio Path on page 85
Using Bluetooth Headsets on page 86
Headset Alert Sounds on page 88
Using a Heaset
•
To answer a call using a headset: Press the
HEADSET button.
•
To end a headset call: Press the HEADSET button. If the other party ends the call, the
HEADSET button remains active. Press the button to end the headset usage.
• To switch from the headset to the handset: To switch from the headset to the handset,
simply lift the handset.
• To switch to handsfree from the headset: To switch to handsfree from the headset, press
the HEADSET button. Replace the handset.
• To switch from the headset to handsfree: Press the SPEAKER button. See Handsfree
Speaker Operation on page 89.
•
To switch to headset from handsfree: Press the
HEADSET button. The button remains
lit whilst you have a call connected handsfree.
•
To mute the call while on the headset: Press the
MUTE button. The button remains lit
whilst the call is muted.
April 2020 9600 Series Phone User Guide 84
Comments on this document? infodev@avaya.com
To Next Page
Loading...
Need help?
General
