• To remove a user, press the Clear soft key.
• To add a user, press the Add soft key.
- Dial the number of another user. When it matches a user, their name is displayed.
Alternatively, use the Dir soft key to select a user from the directory.
- Press the Save soft key to add them.
5. Press Save.
Related links
Follow Me on page 46
Follow Me Here (Status Menu)
If other users has a 'follow me' set to your phone, you can clear or change the setting through the
Status menu.
Procedure
1. Press the Status soft key if shown.
• To do this during a call, press the
PHONE key and then press the Status soft key.
2. Use the up and down cursor keys to highlight Follow Me Here.
• To clear the setting, press the Clear soft key.
• To change the destination of the setting, press the Details soft key.
Related links
Follow Me on page 46
Follow Me Short Codes
Short codes are numbers that you can dial to enable and disable various features. The following
are default short codes that may be available. However, your system administrator can remove
and change the short codes available to you or all users. To use a short code, you may have to
put your currently call on hold.
These are useful as they can be dialed from any phone on the system. For example, this allows
you to login at a basic analog extension and still control a number of features.
Some short codes require you to enter some information when you dial them, typically an
extension number. That is indicated by N in the short codes shown below.
Follow Me
• Follow Me Here: *12*N# – Dialed at the extension to which you want your calls redirected.
Use your own extension number (N) when dialing the short code.
Follow Me
April 2020 9600 Series Phone User Guide 48
Comments on this document? infodev@avaya.com
To Next Page
Loading...
Need help?
General
