EasyManuals Logo

Avaya 9600 Series User Guide

Avaya 9600 Series
178 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
Just pressing the alerting appearance key answers the call either on the speaker or
headset depending on the phone's default audio path setting. See Default Handsfree
Audio Path on page 149.
2. Once you have answered the call, you can switch between different talk modes:
To switch to using the handset, lift the handset.
To switch to handsfree, press the
SPEAKER key. If you were using the handset you,
can now safely replace it.
To switch to headset mode, press the HEADSET key. If you were using the handset,
you can now safely replace it.
If you have answered the call on the speaker or headset, pressing the
SPEAKER or
HEADSET key again before you select another mode ends the call.
Just pressing the call appearance key or any other appearance button puts the current
call on hold.
Related links
Answering Calls on page 36
Answering Another Call
You phone lets you handle multiple calls at the same time. Whilst you can only have one call
connected (talking) at any time, you can have other calls on hold.
A slow flashing red lamp on an appearance button indicates an alerting call. For additional calls
there is no ringing or just a single alert tone.
If you are already on a call, answering a new call automatically put that existing call on hold unless
your first press Drop.
Note: This guide assumes that auto hold is enabled (the default). The system administrator
can disable auto hold for the system, in which case calls are automatically disconnected
rather than put on hold.
Procedure
1. To answer the waiting call, press the appearance key indicating the new call. The new call
is answered and your existing call is automatically put on hold.
2. You can switch between calls by pressing the appearance button of the call to which you
want to speak.
3. The soft key functions shown relate to the call which is currently highlighted. Normally that
is the call just answered or represented by the last appearance key pressed, but using the
cursor keys below the display you can change which call is highlighted whilst still
remaining connected to your current call.
Related links
Answering Calls on page 36
Answering Another Call
April 2020 9600 Series Phone User Guide 37
Comments on this document? infodev@avaya.com

Table of Contents

Other manuals for Avaya 9600 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Avaya 9600 Series and is the answer not in the manual?

Avaya 9600 Series Specifications

General IconGeneral
BrandAvaya
Model9600 Series
CategoryIP Phone
LanguageEnglish

Related product manuals